Cooling Coils

• The control of an exothermal reaction
• To cool down the medium inside the autoclave after the reaction Has been finished
• To heat-up the medium within the autoclave by use of a heat transfer Medium

Thermowell

Thermowell is used to sense the temperature of the reaction medium inside the Autoclave.

MOC of thermowell is SS316.

Safety Head with Rupture Discs

It’s a safety arrangement in case of overshooting of pressure. As the pressure rises above the design pressure, the gases are vented off through Rupture disc which are further collected in catch Pot

High Pressure Charging Pot

MOC: SS 316 solid shaft designed for pressure at & above 100 kg/cm2. Other MOC’s as per client’s request can be fabricated. Connections: N2 inlet, liquid inlet & outlet, PG, Pressure safety valve, high pressure hose pipe, QRC & NRV.

Auto-Cooling System

Either Solenoid Valve ( FLP, IIC) or pneumatically actuated Ball Valves can be used. These valves are connected at the inlet of the internal cooling coil with external source of cooling water supply. Normal tap water is not preferable as it does not give effective cooling at higher temperatures due to steam back pressure.

Hot Oil Circulation System

Used For processes where hot Oil/ water is needed to be circulated into the jacketed autoclaves. The system consists of SS Tank, Pump. Electric heaters, level switch.

Pressure Regulator

Manual charging of gases at desired or higher pressure into the reactor from the gas cylinder can be done using a Gas pressure Regulator. Along with the regulator, accessories like SS braded Hose pipe, Pass valve, NRV, QRC & PG is also provided.

Reflux Condenser

Used in processes where a part of condensate is to be refluxed back to the autoclave & vent off vapours. It is directly mounted on autoclave & works under high pressure.

Receiver Pot

Used to collect the product or the condensate & is connected at the outlet of reflux condenser or Shell & tube HE. MOC like SS316, SS316l, SS304.

Catch Pot

It is a type of Pressure vessel whose volume is twice of Autoclave, used to collect vent vapors, gases from Rupture Disc, safety valve port when the vapour/gas is highly hazardous to release directly into the atmosphere. It is water filled & is provided with inlet, outlet, vent, PG, safety valve & Flame arrestor.

Magnetic drive couplings

Magnetic drive couplings are designed for Lab Scale Stirring application in order to maintain Full vacuum or internal pressure in the glass flask. This coupling comes in various sizes suitable for glass nozzles such as B – 29, B – 24, B – 34. These couplings offer leak proof & Zero contamination alongside uniform mass mixing.